Seagate Nytro 3331 480GB
(XS480SE70014)2.5-inch SASSAS 12GbRead 1100 MB/sWrite 550 MB/s480GB
HIGH
SSD for HP ProLiant DL360 Gen10 Plus (DL360 Gen10+)
2021–2022
Form Factor: 2.5-inch SATAInterface: SATA IIIMax Capacity: 7.68TB
Upgradeable
Quick answer
The HP ProLiant DL360 Gen10 Plus (DL360 Gen10+) is matched with Seagate Nytro 3331 480GB, Samsung PM1733 3.84TB, Samsung PM9A3 1.92TB, Micron 5400 PRO 3.84TB, Seagate Nytro 3350 960GB, Micron 5400 PRO 1.92TB. Compatible storage type: 2.5-inch SATA SATA III. Capacity guidance: up to 7.68TB. Before buying, confirm your exact model number, storage interface, physical size, and connector/keying. Listings are from eBay and Amazon and may change.
Compatible SSDs for the HP ProLiant DL360 Gen10 Plus
Samsung PM1733 3.84TB
(MZWLJ3T8HBLS-00007)U.2U.2 NVMeRead 7000 MB/sWrite 3800 MB/s3.84TBNVMeHIGHSamsung PM9A3 1.92TB
(MZQL21T9HCJR-00A07)U.2U.2 NVMeRead 6800 MB/sWrite 4000 MB/s1.92TBNVMeHIGHSamsung PM9A3 1.92TB1 listing
Micron 5400 PRO 3.84TB
(MTFDKBK3T8TDP)2.5-inch SATASATA IIIRead 540 MB/sWrite 520 MB/s3.84TBHIGHMicron 5400 PRO 3.84TB1 listing
Seagate Nytro 3350 960GB
(XS960SE70114)2.5-inch SASSAS 12GbRead 2150 MB/sWrite 1000 MB/s960GBHIGHMicron 5400 PRO 1.92TB
(MTFDKBK1T9TDP)2.5-inch SATASATA IIIRead 540 MB/sWrite 520 MB/s1.92TBHIGH
Listings and prices are pulled from eBay and Amazon and may change. Always verify compatibility — confirm your exact model number, storage interface, physical size, and connector/keying — before purchase. Last checked June 20, 2026.
SSD Upgrade Guide for the HP ProLiant DL360 Gen10 Plus
This device uses a 2.5-inch SATA drive with a SATA III interface. Maximum supported capacity is 7.68TB.
This device supports SATA SSDs. While slower than NVMe, SATA SSDs are still a major improvement over traditional hard drives.
Always power off your device and disconnect power before replacing storage.
Frequently Asked Questions
What SSD fits the HP ProLiant DL360 Gen10 Plus (DL360 Gen10+)?
The HP ProLiant DL360 Gen10 Plus (DL360 Gen10+) is matched with Seagate Nytro 3331 480GB, Samsung PM1733 3.84TB, Samsung PM9A3 1.92TB, Micron 5400 PRO 3.84TB, Seagate Nytro 3350 960GB, Micron 5400 PRO 1.92TB. It supports 2.5-inch SATA SATA III. This device supports up to 7.68TB based on our records. Before buying, confirm your exact model number, storage interface, physical size, and connector/keying.
How do I verify SSD compatibility?
Verify your full model number against the device page, then confirm the physical form factor (2.5-inch SATA), interface (SATA III), and M.2 keying if applicable. Compare against your existing drive or manufacturer specs before purchase.
Can I use NVMe if my device originally had SATA?
The HP ProLiant DL360 Gen10 Plus (DL360 Gen10+) is recorded with a SATA-class interface (2.5-inch SATA SATA III). NVMe drives typically require an NVMe-capable M.2 slot and matching keying — do not assume NVMe works if your model only supports SATA. Check your exact model and slot before buying.
Does physical size and keying matter?
Yes. M.2 drives vary by length (e.g. 2280) and keying (B-key, M-key, B+M). 2.5-inch and other form factors must match the bay or adapter your device accepts. The HP ProLiant DL360 Gen10 Plus (DL360 Gen10+) is documented as 2.5-inch SATA SATA III — a drive with the wrong size or key will not fit or work.
Are these listings live and current?
Listings and prices are pulled from eBay and Amazon and may change at any time. We refresh marketplace data regularly, but always verify the listing title, condition, and seller before purchase.